Connecting to the WiFi - Apple iOS
In order to use the Wifi your device must have a network certificate installed. Follow the steps below to connect an Apple iOS device to the network
-
First of all, click on the link above to download it to your device
-
Double click on the file and choose the device you wish to install the certificate to
-
Open settings, at the top of the main settings menu you will now see a tab marked 'Profile Downloaded' click on it
NB : If prompted do not sign in, instead choose to download the certificate
-
On the next screen you will see an icon at the top right of the screen labelled 'Install' - Click on it and you will be prompted to enter your password
-
Enter your passcode to confirm the install
-
You will see a green tick to confirm the install is successful
-
Now go back into the main menu in Settings and click on the 'About' tab
-
Scroll down to the bottom and click on 'Certificate Trust Settings'
-
Make sure the trust setting for the newly installed certificate is turned on
-
You can now log into Malvern WiFi with your stu.username and password.
-
Remember you will need to authenticate about once every three days. if you struggle to bring up the authentication screen try going to a website you have not been to in the last couple of weeks.
-
Your authentication login is your stu.username and password
Because you are using a Mac there are additional steps you need to take, these are detailed below
